Waterjet
Waterjet Training Checklist
Waterjet Training Checklist
FAQ
FAQ
How do I fix garnet feed issues?
Typically, garnet feed issues are caused by water getting into the feed line. This can be due to the nozzle being to close to the cut surface. Keep in mind your stock may not be flat! To fix the garnet feed, remove the clear feed line and blow it out with air. You may also need to empty the garnet tank and clear out the pneumatic solenoid at the bottom. Make sure that the garnet you put in does not have clumps or other debris.
How do I clean out the waterjet?
Look here! Waterjet Cleanout